본문바로가기

산업다아라 로고산업다아라 메인

통합검색 폼
전체 카테고리

050안심번호는 구매문의 전화걸기문자발송이 가능합니다.

  • facebook 공유
  • Twitter 공유
  • kakaostory 공유
  • blog 공유
AGMACHINE TECHNO CO
VERTICAL MACHINING CENTER 수직 머시닝센터 VMC-95/115/116
AGMACHINE TECHNO CO
VERTICAL MACHINING CENTER 수직 머시닝센터 VMC-95/115/116
AGMACHINE TECHNO CO
VERTICAL MACHINING CENTER 수직 머시닝센터 VMC-95/115/116
이전
  • VERTICAL MACHINING CENTER 수직 머시닝센터 VMC-95/115/116
  • VERTICAL MACHINING CENTER 수직 머시닝센터 VMC-95/115/116
  • VERTICAL MACHINING CENTER 수직 머시닝센터 VMC-95/115/116
다음

다아라몰 견적거래 가이드

1. 견적거래란?
판매 제품에 대해 구매사와 판매사간 거래에 최적화되어 쉽고 편리하게 이용하실 수 있는 서비스입니다.
2. 견적 거래 절차 안내

AGMACHINE TECHNO CO

VERTICAL MACHINING CENTER 수직 머시닝센터 VMC-95/115/116

견적거래 제품

대만 본사 직접 판매 '견적문의' 중국어/영어 문의 가능합니다.

  • All three axes have a hardened box-way design.
  • Oil Circulating Cooling System for Spindle
  • Enhanced Base Design
  • 24 Tools Magazine
  • Automatic Lubrication System
  • 최소 구매 수량 : 1
  • 주문 수량 단위 : 1

AGMA 제조사

문의전화 : 010-3375-5684 제조사 ‘AGMACHINE TECHNO CO’ 에서 직접 판매하는 제품입니다.

품번 선택
제품 선택 폼
제품 선택 테이블
제품코드 형번코드 제품가격 Spindle Transmission Spindle Speed Table Size Max. Table Load
VMC-95 No. 40
견적거래
Belt Driven 8000rpm 1,050 x 580 mm (41.34" x 22.83") 800 kgs (1,760 lbs)
VMC-115 No. 40
견적거래
Belt Driven 8000rpm 1,200 x 580 mm (47.24" x 22.83") 800 kgs (1,760 lbs)
VMC-116 No. 40
견적거래
Belt Driven 8000rpm 1,200 x 600 mm (47.24" x 23.62") 800 kgs (1,760 lbs)
VMC-116 No. 50
견적거래
Gear Driven 6000rpm 1,200 x 600 mm (47.24" x 23.62") 800 kgs (1,760 lbs)

선택 초기화

제품이미지

AGMACHINE TECHNO CO

VERTICAL MACHINING CENTER 수직 머시닝센터 VMC-95/115/116

facebook 공유
Twitter 공유
kakaostory 공유
blog 공유
브랜드소개
브랜드 소개
제품정보

VMC-95/115/116

High-Rigidity Structure

  1. All three axes have a hardened box-way design. In addition, the spindle headstock, column, saddle, base, and table are all made of high-quality Meehanite cast iron.
  2. All slide-ways are heat-treated and precision ground to maintain high precision.
  3. Double guide-ways and a counter-balanced design prevent unexpected vibration from the Z-axis drive, which helps achieve a quality surface finish.
  4. Strategically placed ribs help enhance the spindle headstock structure. The spindle headstock also has the proper proportion of contact with the column, which creates strong spindle support.



Hinged-Belt Chip Conveyor(Option)

This allows for rapid and efficient chip removal during machining in order to maintain a clean machine.


Oil Circulating Cooling System for Spindle

A high efficiency spindle cooling system dissipates running induced heat generation in order to maintain spindle accuracy and prolong spindle life.


Coolant Thru Spindle (C.T.S.)(Option)

THE C.T.S. (COOLANT THROUGH SPINDLE) (A TYPE) system provides 20 bar (280 PSI) of hi-pressure coolant delivery that effectively reduces tool wear because of heat and the slow evacuation of metal chips.


Calibration with laser interferometer is Performed and Certified by PMC

All of our machines are calibrated according to the "VDI 3441 3δ" standard. Calibration is performed for the full travel length of each axis. Each measurement is taken six times to ensure the most consistent and accurate readings.


Enhanced Base Design

The base of the VMC-95/116 has 4-hardened ways that allow for greater stability and accuracy even with heavy loading. In essence, the design fully supports the saddle and table along the entire travel lengths of the X and Y-axes.


24 Tools Magazine

A rapid arm-type tool changer is driven with a precision cam, maintaining toolchanging accuracy of 0.01mm, which in turn will help maintain long-term spindle-clamping accuracy.


Automatic Lubrication System

All AGMA machines use a pressurized central lubricating system. The PLC controlled system allows all three axes to be lubricated evenly to maintain accuracy and prolong machine life.


Double Stoppers Design

To prevent any deviation between the servomotor housing and ball screw bearing housing, each axis is equipped with two stoppers to guarantee absolute axial alignment.


Volumetric Oil Distributor

Lubricating oil is evenly distributed to all the sliding surfaces of the machine via volumetric oil distributors. All stationary lines are made of rigid alloy pipe and hard-plumbed for low maintenance operation over the life of the machine.


Forceful Cleaning Spray-Gun

Equipped on the right front side of base this unit along with the assistance of a high-pressure coolant and air mixture helps increase table cleaning speed.

 ModelVMC-95VMC-115VMC-116
SpindleSpindle TaperNo. 40No. 40 No. 50
TransmissionBelt DrivenBelt DrivenGear Driven
Spindle Speed8,000 r.p.m.8000rpm6000rpm
TableTable Size1,050 x 580 mm (41.34" x 22.83")1,200 x 580 mm (47.24" x 22.83")1,200 x 600 mm
(47.24" x 23.62")
T-Slot Size18 x 5 x 120 mm
(0.71" x 5 x 4.72")
Work Area900 x 550 mm (35.43" x 21.65")1,100 x 550 mm (43.31" x 21.65")1,100 x 600 mm
(43.31" x 23.62")
Max. Table Load800 kgs (1,760 lbs)
Travel & FeedrateX Axis900 mm (35.43")1,100 mm (43.31")
Y Axis550 mm (21.65")600 mm (23.62")
Z Axis580 mm (22.83")600 mm (23.62")
Distance from Spindle Nose to Table170~750 mm
(6.69"~29.53")
170~770 mm
(6.69"~30.31")
Distance from Spindle Center to Column Ways610 mm (24.02")645 mm (25.39")
Rapid TraverseX, Y : 20 m/min (787 IPM) Z : 15 m/min (590 IPM)
Cutting FeedrateX, Y, Z : 1~10,000 mm/min (393 IPM)
ATCTool ShankBT-40/CAT 40BT-50/CAT- 50
Pull StudMAS P40T-1 (45º)MAS P50T-1 (45º)
Magazine Capacity16 tool (option) / 24 Tool (standard) 24 Tool (standard)
Max. Tool Diameter (with adjacent pocket empty)Ø125 mm (4.93")Ø150 mm (5.92")
Max. Tool Diameter (full storage)Armless=Ø100 mm (3.94")
Arm=Ø80 mm(3.15") (option)
Ø125 mm (4.93")
Max. Tool Length300 mm (11.81")
Max. Tool Weight7 kgs (15.4 lbs)8 kgs (17.6lbs)
ATC TypeArm Type (std.)
/Armless Type (opt.)
Arm Type (std.) /Armless Type (opt.)
MotorSpindle(Cont./30min.)7.5/11 kw
(10/15 HP)
11/15 kw
(15/20 HP)
X/Y/Z Axes(Fanuc)3/3/3 kw
(4/4/4 HP)
3/3/4 kw
(4/4/5.4 HP)
Lubrication Pump0.025 kw (0.033 HP)
Coolant Pump0.49 kw (0.66 HP)
Misc.Machine Height2,767 mm (108.94")
Floor Space3,000 x 2,432 mm (118.11" x 95.75")
Machine Weight6,700 kgs
(14,740 lbs)
7,000 kgs
(15,400 lbs)
7,300 kgs
(16,060 lbs)
8,000 kgs
(15,400 lbs)
ControlFanuc 0iMF
Positioning Accuracy (Full Travel)±0.005 mm (±0.0002")
Repeatability±0.003 mm (±0.00012")


월 ~ 금요일 오전 9시 ~ 오후 6시 까지

010-3375-5684

반품/교환
카테고리 내 다른제품
이전
다음
카테고리 내 다른제품 전체보기
판매사의 다른제품
이전
다음
판매사의 다른제품 전체보기
위로가기

판매사 정보

판매사 정보 table
상호 AGMACHINE TECHNO CO
대표자
주소 No.7, Ln. 34, Jhuangcian Rd., Shengang Dist., Taichung City 42951, Taiwan (R.O.C.)
연락처 010-3375-5684
이메일 kyeom@daara.co.kr
사업자번호
닫기

다아라몰 견적거래 가이드

1. 견적거래란?
판매 제품에 대해 구매사와 판매사간 거래에 최적화되어 쉽고 편리하게 이용하실 수 있는 서비스입니다.
2. 견적 거래 절차 안내